Stainless steel abstract sculpture city logo garden decoration
Description of Art Sculptures
Chinese style metal installation sculpture
1. Lost wax casting method. Also known as dewaxing casting, the principle is very simple: wax is made into a wax figure, and then a layer of heat-resistant model material is poured on the mold method, and the mold is heated until the wax begins to melt, and finally burned dry, leaving a hollow shape with the wax figure, and then the metal solution is poured into this hollow. Once the metal solution cools, the mold falls off and an identical wax replica is created. The lost wax casting method is also a major invention in the history of smelting, and the precision and complexity of its casting shape are unmatched by other casting methods. In the Warring States period, China had already used the lost wax casting method. Lost wax casting bronzes with elaborate characteristics were unearthed in Xiashi Chu Tomb in Xichuan, Henan Province and Zeng Hou Yi Tomb in Suixian, Hubei Province respectively. The characteristic of the lost wax casting method is that the model made of wax can be melted, and the casting products with very complicated shapes can be obtained according to its characteristics. The "horse treadle flying swallow" unearthed in the Han tomb of Wuwei, Gansu Province during the Eastern Han Dynasty is set together after lost wax casting, and it is also a fine product of lost wax technology. [1]
Note: Lost wax casting process using a solid mold. Top from left to right: original clay statue; Rubber mold with shell; Pour the wax liquid into the model; Hollow wax mold; Install the gate system. Bottom from left to right: wax figure with enclosure; Pour into metal solution; Open the mold.
2. Ceramic shell casting method. It is a very new technology, which was introduced from industrial casting in the mid-1960s and is now used in at least 95% of commercial fine art foundries. The shell is fixed on colloidal silicon, the wax figure is immersed in glue, removed and then coated with a powdery refractory substance (gypsum). The mixture can be allowed to dry naturally or with the help of a fan. Repeat the previous steps about 7 times so that a 3-8 inch thick shell is formed around the wax figure and gate system. Through steam or rapid heating, the wax figure will be melted, and the shell is heated to a temperature far higher than the solid mold, which can also remove the residual wax, and more importantly, the ceramic components of the shell can be burned, making it stronger to withstand the pressure generated by melting metal. [2]
Specification of Art Sculptures
| Type | Custom large abstract balloon sculpture outdoor square decoration and interior decoration. |
| Size | H:500CM or customized |
| Color | Silver, Beige, red, green, or other colors |
| Technics | Cutting, Welding, and Painting |
| Material | High quality 304, 316 Stainless Steel, FRP and resin |
| Quality Standard | 1.Over 8k high polished degree
2.The material used strictly according to international standard
3.Precision argon arc welding technique 4.Professional QC team
5.100% of quality and transportation insurance |
| | |
Our Advantages
1.High-quality materials
No Matter we use stainless steel plate or stainless steel tubes,We can see the thickness and the surface effect, all use the special exported standrard raw material, generally have 304 stainless steel and 316L stainless steel for your choose, the thickness can be 2-3.5mm.
Our raw materials come from government-operated stainless steel factories, and we have test certification for each batch of materials. We only use 304 or 316 to make stainless steel sculptures. However, other businesses use 201 stainless steel for low prices.
Resin sculpture production process
Fiberglass sculpture is a finished type of sculpture. Fiberglass sculpture has the characteristics of light weight, corrosion resistance and relatively low cost. FRP, also known as FRP, is known as fiber reinforced plastic. It is a composite material composed of synthetic resin as matrix material and glass fiber and its products as reinforcement material.
Production Flow
1. Showing the details drawing/ 3D mold for clients to confirm.
2. Making exact structures according to drawing/ client's photos/ 3D mold.
3. Cover the stainless steel plate on existing structures.
4. Welding and polishing the surface.
5. Stand up and take all different views pictures/ videos, show to clients.
6. Packing into iron box after clients are satisfied with sculptures.
Product Tags:
|
|
ODM Stainless Steel Abstract Sculpture City Logo Garden Decoration Images
|
